Machine Fact Sheet
Wasino Lathe
Model: G07-F
Price: $85,000
Age: New in September 2006
Serial No: 3283
Millat Industries Corp.
4901 Croftshire Dr.
Dayton, OH 45440
View a map »
Contact: Bill Barrows
Phone: (937) 434-6666
| Capacity | Diameter of Swing Over Bed | 400 (15.75 in) |
| Diameter of Nominal Work Size | 120 x 120 (4.75 x 4.75 in) | |
| Bar Capacity | 50 (2 in) | |
| Travel | X-axis Travel | 480 (18 7/8 in) |
| Z-axis Travel | 285 (11 7/32 in) | |
| Spindle | Spindle Nose | A2-6 |
| Spindle Center Height | 1000 (39 in) | |
| Spindle Bore | 61 (2.5 in) | |
| Spindle Bearing ID | 100 (4 in) | |
| Maximum Spindle Speed | 4000 RPM | |
| Feedrates | X-axis Rapid Traverse Rate | 12 (470 ipm) |
| Z-axis Rapid Traverse Rate | 20 (787 ipm) | |
| Motor | A/C Spindle Drive Motor | 7.5 kW (10 HP) |
| Tooling | Type | Gang |
| Turning Tool Size | 20 (3/4) | |
| Boring Bar Diameter | Ø 25 (Ø 1 in) | |
| Tooling Included with Machine | 2 Boring Blocks, 2 Turn & Face Blocks | |
| Material Handling | Robot Auto Gantry Loader | SR-1 |
| Work Size | Ø 95 x 50mm (Ø 3.5 x 2 in) | |
| Handling Weight | 1.5 kg x 2 (3.3 lbs x 2) | |
| Control Axes | Y axis, B axis, ß axis | |
| Rotary Work Stocker | Model WRS-1, 10 Station | |
| Stacking Height | 350 (13 ¾ in) | |
| Work Diameter (OD Guide) | Ø 95 (Ø 3 ¾ in) | |
| Work Diameter (ID Guide) | Ø 120 (Ø 4 ¾) | |
| CNC | CNC Control | Fanuc 21i-TB, 4 Spare M-Codes, .00001 Offsetting, Spindle Orientation, Rigid Tapping |
| Coolant & Chip System | Coolant tank capacity L (gal.) & Size | 140 Liters (37 gallons) |
| Chip Conveyor | Rear Discharge, Turbo Systems Model 5475-8129 | |
| Machine Size | Machine Height | 2540mm (100 in) |
| Floor Space | 2387 × 1829 (94 × 72 in) | |
| Machine Weight | 2030 kg (4478 Ibs) | |
| Power Requirement | 208/60/3 18 kva |
- The above description is based on information in the manufactures brochure or literature accompanying the machine and may not be accurate for this specific equipment. The equipment is being sold by Millat Industries Corp. as is where is with no expressed or implied warranty and no representation as to performance or capability.
- The transformer is not included with the machine.